Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Belta Vios
  6. : How to change the oil and oil filter on Toyota Belta Vios?

Toyota Belta Vios - Video tutorial

Model: Toyota Belta Vios Xp150 - Years 2013-2023
Part: Engine oil
Operation: How to change the oil and oil filter on Toyota Belta Vios?

In order to change the oil and filter on the car, proceed as follows: lift the car by placing it on stands, open the bonnet and unscrew the oil filler cap. Locate the oil drain plug under the car and loosen it, placing a container underneath to collect the used oil. Wait for all the oil to drain completely. Then replace the oil filter located immediately beside the drain plug and then screw both the filter and the plug back on. Finally, fill the system with the new lubricant (always check the oil specifications that are suitable for the type of engine).


Posted on 20 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos