Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump in the Toyota Corolla?

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial, you can see how to replace the fuel pump in the Toyota Corolla, a very simple and quick operation. Before proceeding, disconnect the negative terminal of the battery to work safely.

Start by going to the rear of the cabin, then grab the seat cushion, pull it towards you, and separate it from the base. Next, open the central cap, disconnect both the power connector and the two fuel hoses, and unscrew the large outer ring.

At this point, you can extract the pump and fit the replacement by following the reverse procedure.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Fuel Pump in the Toyota Corolla
How to Remove and Replace the Fuel Pump in the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Below are the step-by-step instructions to remove and replace the fuel pump in the Toyota Corolla. First, open the rear doors and start by removing t…
How to replace the fuel pump on the Toyota Corolla?
How to replace the fuel pump on the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To replace the fuel pump on the Toyota Corolla, remove the clips located under the rear seat so that it can be completely removed. Underneath, you wi…
Replacing the Fuel Pump on a Toyota Corolla
Replacing the Fuel Pump on a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Follow these instructions to remove and replace the fuel pump on a Toyota Corolla. First, open the rear doors and begin by removing the rear seat. Ne…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos