Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs in a Toyota Avensis?

Model: Toyota Avensis T250, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Glow plugs

See other generations:
Video tutorial

In this tutorial, you will see how to replace the glow plugs in a Toyota Avensis, a simple operation but one that requires a lot of attention. First, wait for the engine to be completely cold, then open the bonnet and remove the plastic cover.

Next, undo the indicated bolt with a 10mm socket, move the entire block containing the various wiring, and remove each glow plug protection cap. At this point, simply undo the first glow plug using the appropriate tool, insert the replacement, and tighten it with a torque wrench set to 14Nm.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Toyota Avensis?
How to Replace the Gear Knob on a Toyota Avensis?
Toyota Avensis (2009-2018 / MK 3, T270) Replacing the gear knob on a Toyota Avensis, as shown in this tutorial, is an extremely simple and quick task. First, enter the cabin, then grip the …
Where is the Fuse Box on the Toyota Avensis 3?
Where is the Fuse Box on the Toyota Avensis 3?
Toyota Avensis (2009-2018 / MK 3, T270) In this guide for your Toyota Avensis Mk3 (2009-2018), follow these steps. First, ensure the car is off, then go outside and position yourself at the…
How to Remove the Battery on a Toyota Avensis
How to Remove the Battery on a Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) Replace the damaged battery of a Toyota Avensis. Open the front bonnet of the car (the battery is located in the engine compartment) and remove the p…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos