Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Ignition Coil Replacement Instructions

Model: Toyota Avensis MK 1, T220 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Ignition coil

See other generations:
Video tutorial

If the engine struggles to start or runs very unevenly during the starting phase, the fault may lie with the spark plugs, the leads, or even the ignition coils. In this case, the engine warning light may also illuminate, and the fault memory may contain an error code related to the coils (there is one coil for every two cylinders).

To replace the coil, disconnect the power supply and the spark plug leads. Then, unscrew the fixing bolts and proceed in reverse order to install the new coil.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Replacement of Side Indicator Bulb
Replacement of Side Indicator Bulb
Toyota Avensis (2003-2008 / T250, MK 2) Direction bulbs are very important in every car. Therefore, if they are burnt out, they must be replaced immediately. This is a very simple and easy …
How do you reset the Service light of the Toyota Avensis?
How do you reset the Service light of the Toyota Avensis?
Toyota Avensis (2009-2018 / MK 3, T270) It will be possible to delete the Service light that is shown on the instrument panel of the Toyota Avensis by holding down the TRIP button located o…
How to Reset the Tyre Pressure Light on a Toyota Avensis
How to Reset the Tyre Pressure Light on a Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) To reset the tyre pressure light on a Toyota Avensis, connect a diagnostic tool to the vehicle's OBD port, located at the lower left of the dashboard…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos