Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Corolla
  6. : How to remove the front headlights on the Toyota Corolla?

Toyota Corolla - Video tutorial

Model: Toyota Corolla E170, MK 4, E160 - Years 2013-2019
Part: Headlight
Operation: How to remove the front headlights on the Toyota Corolla?

In this tutorial, we can see how to disassemble the front headlights on the Toyota Corolla, an extremely simple and fast operation. First of all, make sure that the key is not inserted, then open the engine hood and remove the upper grille. Next, unscrew the fastening bolts of the bumper located on both the upper and lower edges, disconnect the connectors of the fog lights, and remove the plastic rivets located inside the wheel arches. At this point, we can separate the bumper from the frame, unscrew the bolts of the headlight in question, and remove it from the housing. To install the replacement, simply follow the reverse procedure.


Posted on 18 May 2023 by ScegliAuto



Replacement headlight bulbs on Corolla
Toyota Corolla (2006-2013 / MK 3) Replacing the headlight bulbs of a Toyota Corolla. We raise the front hood, we secure. We remove the plastic rivets from above the cover that runs th
Change bulbs on Toyota Corolla Verso
Toyota Corolla (2006-2013 / MK 3) Let's see the disassembly of the headlight bulbs of a Toyota Corolla Verso. To begin, let's open the front engine compartment, identify the caps that
Where are the fuses of the Toyota Corolla located?
Toyota Corolla (2006-2013 / MK 3) On the Toyota Corolla, each fuse is located inside one of the special fuse boxes that are installed on the vehicle: in this type of car it will be po

Other guides that may interest you

    Frequently Asked Questions

    • Corolla 2006-2013 - Why is the low beam headlight of the Toyota Corolla not working? Read Answer
    • Corolla 1995-2002 - What kind of bulb does it take for the sidelights of the Toyota Corolla Verso? Read Answer

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos