Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the DGS gearbox on Audi, Seat, Skoda, and Volkswagen vehicles.

Model: (Various brands) Various
Part: Transmission

The DSG gearbox is a system that combines the characteristics of automatic and manual transmissions, offering a smooth and sporty driving experience. This type of dual-clutch automatic transmission was developed by the Volkswagen Group and later adopted by Audi, Skoda, and Seat. To reset the gearbox, we need to turn on the dashboard and press the accelerator pedal for 10 seconds. Then we mark the dashboard, release the pedal, and remove the key. After that, we press the accelerator pedal for 10 seconds. After 10 seconds, we release the pedal and start the vehicle by inserting the key into the ignition switch.

Posted on 29 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on VW, Seat, and Skoda vehicles?
How to reset the TPMS light on VW, Seat, and Skoda vehicles?
(Various brands) Various The reset of the tire pressure warning light on Skoda, Seat, and Volkswagen vehicles follows simple and quick steps to be carried out independently. …
How to Reset the Sunroof Opening on Skoda, VW, and Audi Vehicles
How to Reset the Sunroof Opening on Skoda, VW, and Audi Vehicles
(Various brands) Various Today, I will explain how to reset the electric opening of the sunroof on Skoda, Volkswagen, and Audi vehicles. To perform the reset of the opening a…
How to replace the cabin air filter on Volkswagen, Skoda, and Audi vehicles
How to replace the cabin air filter on Volkswagen, Skoda, and Audi vehicles
(Various brands) Various The cabin air filter on Skoda, Volkswagen, and Audi vehicles is located inside the cabin, specifically under the passenger side glove compartment. To…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos