Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the clutch game

Model: (Various brands) Various
Part: Clutch

The so-called "clutch pedal play" is the small movement (between 1 and 3 cm) that we perceive when we press the pedal, before it starts to resist, and that is regulated by the manufacturer. If the "play" becomes excessive, the clutch may not disengage completely, making it difficult to change gears, and prematurely wearing out the clutch disc and release bearing. On the other hand, if the "play" is insufficient, the clutch may slip causing power loss and overheating. How do you adjust the pedal play? If the clutch is cable-operated, usually the adjustment screw is located near the pedal, you measure the play, as shown by the YouTuber, you loosen the lock nut, to increase or decrease the cable tension. If the clutch is hydraulic, you must check the clutch fluid level (the reservoir is usually located near the brake); top up by checking in the user manual which is the recommended fluid, then bleed any excess air, with the help of a vacuum pump (or an assistant). If this is not enough, then you should consult a mechanic.

Posted on 13 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust a Cable Clutch on a Motorcycle
How to Adjust a Cable Clutch on a Motorcycle
(Various brands) Various In this video, you will learn how to adjust a cable clutch: this system is applicable to most models. The cable must be adjusted neither too tight no…
How to Check if Your Car's Clutch is Worn
How to Check if Your Car's Clutch is Worn
(Various brands) Various In this video, see how to check if your manual car's clutch is worn. There are two very simple methods: the first is while driving at around 2,500 RP…
How to Replace the Motorcycle Clutch Cable
How to Replace the Motorcycle Clutch Cable
(Various brands) Various This video will show you how to replace the motorcycle clutch cable. Although this operation is not complex, it is essential to replace the motorcycl…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos