Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Alternator

Model: (Various brands) Various
Part: Alternator

Let’s see how to replace the car alternator. Pull the lever located at the bottom left of the dashboard and lift the bonnet, securing it. Locate the power battery and disconnect the terminals. Unscrew the plate pins (as shown in the video) with a socket, being careful not to damage the wiring membranes, and unscrew all the fastening pins of the alternator. Once disassembly is complete, extract it from the engine bay (remove the belts). Take the new replacement part and insert it into the appropriate housing, screw in the fastening pins, then tighten the side pins of the alternator. Check the correct voltage with a tester after connecting it to the battery.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing a Car Alternator
Replacing a Car Alternator
(Various brands) Various In this video, you will see how to replace the alternator on a generic car. In fact, on most cars, the disassembly procedure is quite similar: essent…
How to Replace the Alternator on Any Car
(Various brands) Various This video shows you how to replace the alternator on any car. First, ensure you disconnect the negative battery terminal. On a transverse engine, th…
How to Replace the Alternator Pulley?
How to Replace the Alternator Pulley?
(Various brands) Various To replace the alternator pulley on a car, you need to completely remove the alternator from its housing by unscrewing the bolts that secure it in pl…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos