Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Fuse in Your Car

Model: (Various brands) Various
Part: Fuse box

How do you replace the fuses in your car? Let’s look at how to remove the fuses. Open the door and enter the vehicle, then use a plastic lever to remove the cover in the glove compartment located on the dashboard under the steering wheel, and then remove the drawer. Use pliers to pull out the damaged fuses located in the compartment. Once this is done, insert the new fuses into the designated slots in the compartment. Finally, close the fuse inspection box with the cover and reinstall the drawer. You can find the other operational fuses in the engine bay of the car.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Status of a Fuse
How to Check the Status of a Fuse
(Various brands) Various Today, we will see how to check the status of a car fuse. Inside the vehicle, there are usually two fuse boxes, located in the cabin and under the bo…
How to properly remove a fuse
How to properly remove a fuse
(Various brands) Various Removing a fuse from its box is a simple operation, but it requires some precautions: first of all, the car must be turned off. We locate the fuse bo…
How to Replace a Fuse
How to Replace a Fuse
(Various brands) Various Replacing a fuse is a simple and quick task that can be done independently. To remove it, open the cover of the fuse box and use a pair of pliers or …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where to find the fuses of the Yamaha T-max 530 DX? Read answer
    • Vari - Where is the fuse box located on the Vespa GTS 125? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What is the front wiper fuse? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos