Do it yourself
Frequently asked questions about cars and motorcycles

How to Drain the Fuel Tank of Your Car Using a Jumper Wire

Model: (Various brands) Various
Part: Fuel pump

This guide shows how to drain the fuel tank of your car using a jumper wire on the fuel pump control circuit. First, disconnect the battery by removing the negative terminal. Next, replace the fuel line from the fuel filter, located in the engine bay, with a line that reaches a container. Plug the line going to the engine with a 7 mm pipe cap. From the fuse box, locate the fuel pump relay, remove it, and bridge the two terminals of the pump control with electrical wire or a paperclip. Reconnect the battery and wait for the tank to drain completely.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Sometimes it may be necessary to empty the fuel tank, for example, in the case of incorrect refuelling (petrol instead of diesel or vice versa). If y…
(Various brands) Various In this video, we see that if during refuelling you accidentally put a different type of fuel into the tank than what your vehicle requires, you must…
(Various brands) Various Have you filled up with petrol but your vehicle runs on diesel? With the help of this short video tutorial, you will learn how to quickly empty the f…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos