Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reassemble the Dashboard of the Kymco 125

Model: (Various brands) Various
Part: Dashboard

Video tutorial

To reassemble the dashboard of the scooter, proceed as follows: First, connect the position light connectors and terminals, then attach the headlight connectors, and reposition the optical unit in its housing. Secure the fixing nuts and reposition the cover with the dashboard on the handlebars, taking care not to pinch the electrical wiring behind.

Be sure to reconnect the speedometer, then reattach the front panel and secure it with its screws, completing the job by tightening all the screws located under the handlebars.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Change the Battery on a Kymco 125 Scooter
How to Change the Battery on a Kymco 125 Scooter
(Various brands) Various In this tutorial video, you will see how to replace the battery on a Kymco 125 scooter: the first step is to purchase a new battery with the same amp…
How to Reset the Oil Change Light on the Kymco Agility 125
How to Reset the Oil Change Light on the Kymco Agility 125
(Various brands) Various After performing the oil change service and replacing the filter on the motorcycle, you will need to clear the oil change warning on the dashboard. T…
How to Replace the Rear Suspension on a Kymco Agility 125
How to Replace the Rear Suspension on a Kymco Agility 125
(Various brands) Various This tutorial shows how to replace the rear suspension on a Kymco Agility 125 in a few simple steps. The suspension is difficult to reach from behind…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos