Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble and reassemble a fuel pump

Model: (Various brands) Various
Part: Fuel pump

In this video we see how to disassemble and reassemble a fuel pump: once the pump is removed from its housing, we need to open the clips on the sides of the body, so that the spring and internal mechanism can come off. However, removing the internal piston will be a rather laborious operation. It is not easy to give a valid indication for the purchase of the spare part, as much depends on the vehicle on which you are working. In fact, we found pistons online that cost at least twice as much as the entire inside of the fuel pump, so it will be important to know which pump we are talking about. Reassembling it is paradoxically easier, because the joints have already been opened, so it will be enough to tighten the various clamps well and where necessary, replace them. Our advice is still to change the entire inside, because this way you are sure to do a better job and there is no danger that some component remains loose. Now we put the interior back into its shell and we can lower the pump back into the fuel.

Posted on 5 June 2024 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various This video shows how to check the condition of your car's fuel pump and, if necessary, how to replace it. If your fuel pump needs replacing, you must…
(Various brands) Various In this video, you will see how to check the operational status of the electric fuel pump or the submerged float pump in the fuel tank of your vehicl…
(Various brands) Various (2009-2015 / ) In this video tutorial, you can see how to remove the fuel pump. First, to avoid short circuits, disconnect the battery of your car for safer working…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos