Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs of the Volkswagen Tiguan and Jetta with the 2.0 TSI engine

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Spark plugs

See other generations:
Video tutorial

Let's see how to change the spark plugs on the Volkswagen 2.0 TSI engine of a Tiguan or a Jetta: remove the engine cover by removing the 4 tabs, disconnect the coil connectors and then pull the coils upwards. It is advisable to mark the position of the coils to reassemble them correctly, then insert the socket to extract the spark plugs, with the corresponding extension, and loosen counterclockwise.

Carefully remove the spark plug (it would be difficult to retrieve it inside the well) insert the new spark plug, avoiding tightening it too much. Reinsert the coils, reconnect the electrical connectors and put the engine cover back in place.


Posted on 10 November 2025 by ScegliAuto


Related tutorials

How do you replace the water pump of the Volkswagen Tiguan 2.0 TSi?
How do you replace the water pump of the Volkswagen Tiguan 2.0 TSi?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) To replace the water pump of the Volkswagen Tiguan 2.0 TSi, you will need to lift the car in order to have access to the components in the lower part…
Replacement of the water pump of the Volkswagen Tiguan 2.0 TSI
Replacement of the water pump of the Volkswagen Tiguan 2.0 TSI
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Today's main steps will show us how to disassemble and replace the water pump kit of the Volkswagen Tiguan 2.0 TSI. First, we open the hood of the ca…
How do you replace the glow plugs in a VOLKSWAGEN TIGUAN 1.6 TDI?
How do you replace the glow plugs in a VOLKSWAGEN TIGUAN 1.6 TDI?
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) You can definitely try it on your own. To replace the glow plugs on your Volkswagen Tiguan 1.6 TDI, start by turning off the engine and disconnecting…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos