|
Do it yourself
| |||
| ||||
How to replace the engine oil and oil filter of a 2005 Volkswagen Polo.
Model: Volkswagen Polo
MK IV, Polo IV, Polo 4, MK 4, 9N
- Years 2001-2009
The replacement of the engine oil and oil filter must be performed on Volkswagen Polo vehicles at least once a year. The oil we recommend for the replacement is VW 50457 Della Syntium, which can be purchased online or at auto parts stores. First, we open the front hood and remove the oil filler cap to facilitate the draining from the oil pan. We lift the front of the car and, after unscrewing the oil pan bolt, let the oil drain into a container. Next, we proceed with the oil filter replacement. We unscrew the bolt that secures the filter cover and remove it for replacement; during this procedure, it will be necessary to also replace the gasket. We install the filter housing and close the oil filler cap, then pour approximately four liters of engine oil into the upper reservoir.
Posted on 2 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Polo
(2009-2017 /
Polo 5, Polo V, MK 5, MK V, 6R)
In this video tutorial, you will see how to replace the engine oil and oil filter on a Volkswagen Polo 1.2 TSI. First, open the bonnet and remove the…
Volkswagen Polo
(2001-2009 /
MK IV, Polo IV, Polo 4, MK 4, 9N)
Let’s discover the step-by-step instructions for changing the engine oil and oil filter while performing the regular maintenance service on the Volks…
Volkswagen Polo
(2009-2017 /
Polo 5, Polo V, MK 5, MK V, 6R)
Below are the steps necessary to perform the routine maintenance service, replacing the engine oil and oil filter of the Volkswagen Polo 1.2 TSI. Fir…
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.088
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |