Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Replacing the cabin air filter in the Volkswagen Polo.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Cabin air filter
Operation: Replacing the cabin air filter in the Volkswagen Polo.

To replace the Volkswagen Polo cabin air filter, we put the car on a well-immobilized surface. We identify the position of the filter housing itself which, in this car, we find behind the glovebox, inside the passenger compartment on the passenger side. To remove the filter it is necessary to remove the cover. We do this by sliding the two zip ties (as shown in the images) and pulling the cover away from its position. At this point we can extract the air filter from its seat (together with a frame that serves to position it well and not to make it deform) and replace it with the new one. Let's reassemble everything following, backwards, the operations seen in the images.


Posted on 23 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2001-2009 - What does the cabin filter light on the Volkswagen Polo 4 mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos