Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How to remove the radiator of a Vw Golf

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf V, MK 5, Golf 5 - Years 2003-2008
Part: Radiator
Operation: How to remove the radiator of a Vw Golf

Disassembly of the radiator of a Vw Golf. After removing the front bumper, with a suitable socket wrench we go to disassemble the plates that block the radiator in the upper part, then we lift the car on a column bridge and loosen the clamp of the water hose. We detach the various convoy sleeves of the refrigeration system with pliers, (we unscrew the lock that blocks the front hood if it hinders the extraction). We take out the fan kit and immediately after the radiator from the engine compartment. Let's get ready to mount the new piece in the engine compartment: mount the cooling fans, clamps, pins and various pipes. We reassemble the anchoring brackets of the radiator with attached plates. We tighten the plastics of the bumper well with a socket wrench. Finally we top up with the new liquid.


Posted on 25 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Golf 2008-2012 - Why does the coolant warning light turn on in the Volkswagen Golf 6? Read Answer
    • Golf 2003-2008 - Why doesn't the Volkswagen Golf 5 engine cooling fan work? Read Answer
    • Golf 1997-2003 - Where is the coolant temperature sensor located in a Volkswagen Golf MK4? Read Answer
    • Golf 2003-2008 - How much does it cost to replace the radiator of the Volkswagen Golf 5? Read Answer
    • Golf 1997-2003 - How much is the radiator fan of the VW Golf 1.6 petrol 2001? Read Answer

How to set the time on the Peugeot 308

If we need to change the time on this car we can follow the instructions given in this video tutorial and read the instructions below. First of all, access the driver's seat and turn on the ignition. On the right multifunction lever there are the controls with the arrows to scroll the various menu functions and scroll the various functions up to "display adjust", after which press the button behind the lever to change the time, once set the new value press again the key with the arrow indication and modify the minutes in this way the work will be completed.

Watch the video!


by ScegliAuto

More videos