Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Headlight replacement on Vw Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Headlight
Operation: Headlight replacement on Vw Polo

Let's see the disassembly of the headlight on Vw Polo. We open the bonnet by pulling the bonnet opening lever and put it in safety. We unscrew the locking pins above the headlight with a socket wrench or cordless screwdriver. We disconnect the power supply terminals and extract the same from the car body. We assemble the new headlight with the new bulbs if damaged and (always suitable type and size) we insert the headlight in its housing. Finally we tighten the pins of the lighthouse with the socket wrench in the upper part of the same. We test the correct functioning of the lights positioned inside the lighthouse.


Posted on 27 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the front headlight of the Volkswagen Polo 8? Read Answer
    • Polo 2001-2009 - How much does the right headlight of a Volkswagen Polo cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos