Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Replacing the front door speaker on Vw Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK IV, Polo IV, 9N, MK 4 - Years 2001-2009
Part: Door panel
Operation: Replacing the front door speaker on Vw Polo

Let's see the disassembly of the speaker placed in the right front door panel on a Volkswagen Polo. We disconnect the battery terminals located in the engine compartment, with a screwdriver we unscrew the screws placed in the space of the handle (after removing the coating). We remove the plastic coating near the opening lever. Unscrew the remaining screws on the door panel and detach the clips for tightening it. Finally, remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). Unscrew the screws on the sides of the speaker, disconnect the power supply terminal.


Posted on 28 November 2023 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

    Frequently Asked Questions

    • Polo 1994-2003 - How do you remove the Volkswagen Polo door panel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos