Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Roof Lining on VW Passat

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Checks and maintenance

Is the roof lining panel due for replacement? Let's see how to remove it from a Passat. Remove the side handles above the panel using a screwdriver, then take off the sun visors and the overhead lighting unit located in the panel. If the car has a sunroof, open it before removing the panel. Pry the roof lining panel away from the perimeter of the car's roof using trim tools. Once the panel is free from screws, etc., you can pull it out of the vehicle. Be careful when pulling it out as it may bend. Fit the new panel inside the car.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Roof Lining of a Volkswagen Passat
How to Remove the Roof Lining of a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Below are the main instructions on how to remove and replace the roof lining of a Volkswagen Passat. First, get inside the cabin and start removing a…
Removing the Headlining on Passat
Removing the Headlining on Passat
Volkswagen Passat (2005-2010 / B6, 3C) Is the headlining of the Volkswagen Passat coming loose? Let’s see how to remove the covering panel from under the roof. Remove the side handles of t…
How to Replace the Headlining in a Volkswagen Passat
How to Replace the Headlining in a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) This guide briefly explains the instructions needed to dismantle and replace the headlining in a Volkswagen Passat. First, get into the vehicle and s…

    Frequently Asked Questions

    • Passat 2005-2010 - How to unlock the Volkswagen Passat's lock? Read answer
    • Passat 2005-2010 - Why doesn't the Volkswagen Passat start up? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos