|
Do it yourself
| |||
| ||||
Removing the Headlining on Passat
Model: Volkswagen Passat
B6, 3C
- Years:
2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
Is the headlining of the Volkswagen Passat coming loose? Let’s see how to remove the covering panel from under the roof. Remove the side handles of the headlining with a screwdriver, then remove the sun visors and the overhead lighting unit positioned in the panel. Once everything is removed, detach the headlining panel around the perimeter of the car's roof. Once the panel is free from clips, you can pull it out of the vehicle. Have the covering panel repaired or replace it with a new one. During the installation of the new panel, secure the clips underneath the panel and under the pillar covers.
Updated on 18 April 2026 by ScegliAuto
Related tutorials
Volkswagen Passat
(2005-2010 /
B6, 3C)
Below are the main instructions on how to remove and replace the roof lining of a Volkswagen Passat. First, get inside the cabin and start removing a…
Volkswagen Passat
(2010-2014 /
B7)
The instructions in this guide will illustrate the procedure for removing and replacing the headlining or interior roof lining of the Volkswagen Pass…
Volkswagen Passat
(2005-2010 /
B6, 3C)
Today's instructions will show us the process of disassembling and replacing the headliner or the interior roof lining of the Volkswagen Passat. Firs…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Guide to replacing the 12V battery on the Toyota Yaris Cross
Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |