Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Jetta
    4. : Air conditioning compressor replacement on Vw Jetta

Volkswagen Jetta - Video tutorial

Model: Volkswagen Jetta A4, MK 4 - Years 1998-2005
Part: Air conditioning
Operation: Air conditioning compressor replacement on Vw Jetta

Does the air conditioning compressor stop working? Let's see how it disassembles on a Vw Jetta. We pull the bar located at the bottom left of the dashboard and lift the bonnet putting it in safety, we identify the battery of the power supply and disconnect the terminals. We lift the car with a column bridge, remove the compressor belt. We unscrew all the locking pins of the air conditioning compressor. Once the disassembly is finished, remove it from the engine compartment. We insert the new compressor into the suitable housing, screw in the locking pins. We connect the power supply terminals.


Posted on 5 December 2023 by ScegliAuto



Guide to replacing the air conditioning compressor of the Volkswagen Jetta 2.5
Volkswagen Jetta (2010-2018 / A6, MK 6) Today's guide will show us the useful instructions for disassembling and replacing the air conditioning compressor of the Volkswagen Jetta 2.5L. Firs
How to remove the air conditioning compressor from the Volkswagen Jetta.
Volkswagen Jetta (1998-2005 / A4, MK 4) Let's take a look in this guide at the instructions on how to disassemble and replace the air conditioning compressor of the Volkswagen Jetta, as wel
Replacement of the air conditioning compressor of the Volkswagen Jetta 2.5
Volkswagen Jetta (2005-2010 / MK 5, A5) Let's see in this guide the steps that will allow us to disassemble and replace the air conditioning compressor of the Volkswagen Jetta. First of all

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos