Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the CV Boot on a Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Axle shaft

See other generations:
Video tutorial

After lifting the car, removing the wheel, and disassembling the suspension system, you can remove the entire CV axle. At this point, we will show you how to remove the CV boot.

On the inner side, the rubber cover is held in place by a metal tie that must be removed by prying with a screwdriver and, if necessary, a hammer. Do the same on the opposite side, then cut it in two parts for removal.

You can extract the oscillating bearing that holds the splined axle in place. Position the new cover, and by following the steps in reverse, you can reassemble everything.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Front Shock Absorber Replacement
Front Shock Absorber Replacement
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the front shock absorbers, you first need appropriate spring compressors to compress the springs and remove the shock absorber mount. Lift…
How to Remove the Coolant Level Sensor from a Volkswagen Golf
How to Remove the Coolant Level Sensor from a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Before starting, open the bonnet of your Volkswagen Golf. Begin by disconnecting the relevant electrical connector. Next, using pliers, unclip and re…
How to Reset the Airbag Light on a Golf 5.
How to Reset the Airbag Light on a Golf 5.
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you can see how to reset the airbag light on the Golf 5 by following simple steps that will guide you to proper vehicle manag…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos