Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speedometer from a Golf 3

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Instrument cluster

See other generations:
Video tutorial

Remove the instrument cluster from the Golf? Start by taking off the side plastics above the dashboard. Remove the switch panel on the left side of the instrument cluster and the cover on the right side.

Unscrew the screws located in the plastics on the sides of the instrument cluster trim using a screwdriver. Unscrew the securing screws of the instrument cluster.

After removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Install a new piece or replace the LEDs/bulbs in the cluster and reassemble the same.

After installing the instrument cluster, check its functionality.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How to Reset the Trip Meter of the Volkswagen Golf?
How to Reset the Trip Meter of the Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To reset the trip meter of the Volkswagen Golf, turn on the instrument cluster by inserting the ignition key into the corresponding ignition switch. …
How to Reset the Trip Meter of the Volkswagen Golf?
How to Reset the Trip Meter of the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To reset the trip meter of the Volkswagen Golf, turn on the instrument cluster by inserting the ignition key into the corresponding slot: once the cl…
How do you reset the partial odometer of the Volkswagen Golf?
How do you reset the partial odometer of the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To reset the partial odometer of the Volkswagen Golf, you need to insert the ignition key into the corresponding slot: once the dashboard is turned o…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos