Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

The EPC light stands for "Electric Power Control" and illuminates whenever the control unit detects an electrical error. Often, on the Volkswagen Golf, this error is sent from the engine to the control unit due to fuelling issues, so it is easy to reset the light by simply cleaning the carburettor or throttle body with a suitable cleaning spray, and the warning will disappear.

The better you clean, the easier it will be for the light to go out. If this does not work, try disconnecting the battery and leaving it disconnected for 10-15 minutes. Reconnect it and check if the error has cleared.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The EPC light on a Volkswagen Golf 7 indicates that the engine requires a check. The light is accompanied by a series of malfunctions such as the car…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you can see how to reset the airbag light on the Golf 5 by following simple steps that will guide you to proper vehicle manag…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The steps to reset the service light on the Volkswagen Golf are the same as those for the Volkswagen Jetta. To reset the service light related to the…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - What does the Volkswagen Golf error code P171900 indicate? Read answer
    • Golf 2008-2012 - What does the p171900 fault code indicate, in the Volkswagen Golf? Read answer
    • Golf 2019-2026 - How to reset the Volkswagen Golf Infotainment system? Read answer
    • Golf 2008-2012 - What does the fault code 00883 mean in the Volkswagen Golf? Read answer
    • Golf 2012-2019 - What does the Volkswagen Golf error P171900 mean? Read answer
    • Golf 2019-2026 - How to reset the Infotainment system in the Volkswagen Golf 8? Read answer
    • Golf 1997-2003 - What does the DSG error message on the Volkswagen Golf Mk4 mean? Read answer
    • Golf 2012-2019 - What to do when the brake pad warning light comes on on my Golf 7? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos