Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor from a Volkswagen Passat CC 2.0 TSI

Model: Volkswagen Passat Cc MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Starter motor

Video tutorial

In today's tutorial video, you will learn how to remove and replace the starter motor of a Volkswagen Passat CC 2.0 TSI. First, open and lift the bonnet of your car: disconnect the two battery terminals (positive and negative) beforehand, then remove the screw located at the bottom of the air filter box bracket.

At this point, remove the intake hose along with the air filter to access the starter motor; simply unscrew its screws and disconnect the electrical connector to remove it: follow the video until the end!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Replacement of the starter motor of the Volkswagen Passat CC 2.0 TSI
Replacement of the starter motor of the Volkswagen Passat CC 2.0 TSI
Volkswagen Passat Cc (2008-2018 / MK 1) The instructions provided in this guide will show us how to disassemble and replace the starter motor of the Volkswagen Passat CC 2.0 TSI. First, we …
How to Remove the Front Grille of the Volkswagen Passat CC
How to Remove the Front Grille of the Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) Removing the front grille of your Volkswagen Passat CC may seem like a complex task. In reality, it is very simple, and by following the steps descri…
How to Replace the Cabin Fan Motor in a Volkswagen Passat CC
How to Replace the Cabin Fan Motor in a Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) Below is the procedure for removing and replacing the cabin fan motor in a Volkswagen Passat CC. First, get inside the cabin on the passenger side an…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos