Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater/Air Conditioning Fan on a Volkswagen Passat B6

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

In this video tutorial, you will learn how to dismantle and replace the heater or air conditioning fan on a Volkswagen Passat B6, third generation. First, access the front passenger side and start by removing the glove compartment; to do this, unscrew all the fastening screws using a Torx screwdriver, as shown in the video.

At this point, disconnect the connector at the back and unscrew the fixing screws of the cabin fan, then disconnect its electrical connector; follow the video to the end!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Before you begin, sit in the driver's seat of your Volkswagen Passat. Insert the electronic key into the designated slot. Next, press and hold the bu…
Removing the Cabin Heater Fan from a Volkswagen Passat B6 B7
Removing the Cabin Heater Fan from a Volkswagen Passat B6 B7
Volkswagen Passat (2005-2010 / B6, 3C) In this video tutorial, you will learn how to remove the cabin heater fan from a Volkswagen Passat B6 and B7. First, access the inside of the car and…
Replacing the Air Conditioning Compressor of the Volkswagen Passat
Replacing the Air Conditioning Compressor of the Volkswagen Passat
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) Today's guide shows the main steps to remove and replace the air conditioning compressor of the Volkswagen Passat. First, open the bonnet and disconn…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos