Do it yourself
| ||||
|
Volkswagen Transporter - Video tutorial
Model: Volkswagen Transporter
MK 2, T2
- Years 1967-1979 The guide shows you how to remove the fuel tank of the Volkswagen Transporter T2. Before carrying out the operation it is necessary to disconnect the vehicle battery. Once the tank has been drained as much as possible, you can proceed with the operation. Lift the Transporter to continue and remove the fire bulkhead. Once the hydraulic hose connected to the tank has been disconnected, drain the remaining fuel into a suitable container. Unscrew, with a 13 mm wrench, the two retaining bands of the tank and the pressure relief pipes. Disconnect the supply hose and, after moving the tank slightly, disconnect the pump hose and the earth hose. Completely remove the tank. Before installing the new tank, replace the existing pipes and connectors. Insert the tank, connect all cables and tighten it in place. Refit the fire protection bulkhead and lower the vehicle.
Posted on 4 March 2024 by ScegliAuto
Other guides that may interest you
|
How to open the Honda Sh 125 saddle when the battery is lowLet's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |