Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Central Locking Module on the Volkswagen Golf - Bora MK4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Door lock

See other generations:
Video tutorial

In this video, you will see how to remove the door lock module on the front door of the fourth series Volkswagen Golf, as well as on the Bora and Jetta. First, open the front door and start by removing the door panel; to do this, unscrew the screws found on the sides and remove the window switch panel, disconnecting the electrical connector located underneath.

Once the panel is removed, you can take out the speaker by disconnecting all the wiring; then remove the lock module by unscrewing the side screws (using a Torx screwdriver).


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Removing the Ignition Barrel on the Volkswagen Golf 4 - Bora - Jetta
Removing the Ignition Barrel on the Volkswagen Golf 4 - Bora - Jetta
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, in this video tutorial, learn how to remove and replace the ignition barrel on the fourth-generation Volkswagen Golf, as well as the Jetta and…
Removing the Ignition Barrel on a Volkswagen Golf 4 - Bora
Removing the Ignition Barrel on a Volkswagen Golf 4 - Bora
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video, you will see how to remove and replace the ignition barrel on the fourth generation Volkswagen Golf, as well as on the Bora and Jetta.…
How to Reset the Central Locking of the Volkswagen Golf 4?
How to Reset the Central Locking of the Volkswagen Golf 4?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos