Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

To empty the fuel tank, first remove the fuel pump fuse. Next, disconnect the hoses located at the top of the engine, following the instructions shown in the tutorial.

Attach a hose to the car's fuel line that leads into a container to collect the fuel. At this point, you can activate the fuel flow using a remote control from the OBD device, allowing the fuel to flow into the container.

Once all the fuel has been collected, you can reassemble all the previously removed parts.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1983-1992 / Golf 2, MK 2) Today's main instructions will show you how to remove and replace the fuel tank on the Volkswagen Golf. First, open the boot lid and begin disassembl…
Volkswagen Golf (1974-1983 / Golf 1, MK 1) Here are the main instructions that will allow you to remove and replace the fuel tank of the Volkswagen Golf. First, raise the vehicle and start uns…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide shows the main steps to remove the fuel tank from the Volkswagen Golf, following the instructions below. First, lift the vehicle and start…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos