Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Brake Pads on Volkswagen Passat

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Brake pads

See other generations:
Video tutorial

Using a suitable spanner as shown in the video, remove the wheel cover from its seat. Loosen the wheel bolts of the affected wheel, then lift the vehicle with a jack and place axle stands underneath.

Finish unscrewing the aforementioned bolts and, using a suitable pliers, remove the large pin located on the brake caliper. Disconnect the connectors and unscrew the bolts of the brake caliper, allowing you to remove it. At this point, you can finally extract the pads from their seat and insert the new ones: take the opportunity to clean the disc.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2010-2014 / B7) The following steps will guide you on how to remove and replace the rear brake pads on a Volkswagen Passat. First, lift the vehicle and start by remo…
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) Today, you will see the step-by-step instructions to remove and replace the front brake pads on the Volkswagen Passat. First, lift the vehicle and re…
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) To replace the rear brake pads on a Volkswagen Passat, lift the car using a jack or ramp so that the corresponding wheel is not in contact with the g…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Warning Light on the Hyundai I10

The tyre warning light on the instrument panel of your Hyundai I10 (third series) alerts you when there is a puncture or when the tyres are inflated to the wrong pressure. If it lights up accidentally, you can reset it manually by following these steps. Once the instrument panel is on, press the directional button located on the right side of the steering wheel and find the tyre pressure display screen. Finally, press and hold the "OK" button for a few seconds and select the "Set" option to complete the reset of the light.

Watch the video!


by ScegliAuto

More videos