Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Timing belt

The timing belt on a car should generally be replaced every 62,000 miles. Perform the work with the engine cold. Disconnect the negative battery cable and remove all components that obstruct access to the belt. Extract the timing belt and remove the tensioner bearing and the fixed guide bearing. Check for any fluid leaks as these could damage the timing belt. Install the new belt, ensuring to follow the direction of the arrows on it in the rotation sense.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Volkswagen Passat 2.0 TFSI
Guide to replacing the timing belt of the Volkswagen Passat 2.0 TFSI
Volkswagen Passat (2005-2010 / B6, 3C) In this guide, we will see the useful information for disassembling and replacing the timing belt of the Volkswagen Passat 2.0 TFSI; the manufacturer…
Instructions for Removing the Timing Belt
Instructions for Removing the Timing Belt
Volkswagen Passat (2005-2010 / B6, 3C) Many TDI engines in the Volkswagen Audi range feature a transverse layout, meaning the timing belt is positioned at the front, and to replace it, you…
Guide to Replacing the Timing Belt of the Volkswagen Passat 2.0 TDI
Guide to Replacing the Timing Belt of the Volkswagen Passat 2.0 TDI
Volkswagen Passat (2005-2010 / B6, 3C) Today, we will discover the steps and instructions on how to remove and replace the timing belt of the Volkswagen Passat 2.0 TDI. First, open the bon…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos