Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator on a Volkswagen Golf

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Radiator

See other generations:
Video tutorial

First, disconnect the front grille of the radiator. Meanwhile, release the lever for opening the bonnet using a flat screwdriver.

Once done, proceed to remove the front bumper. Unscrew the six screws securing it from above, then remove the two small grilles underneath and unscrew the other screws that are now exposed.

Finally, unscrew the screws that secure the bumper to the wheel arch, then remove the bumper. Disconnect the rear cover as shown in the video, then open the radiator fluid tap, collecting it in a container.

Meanwhile, disconnect the connectors. Now detach the hose and unscrew the radiator mounting screws.

Remove the fan first, followed by the radiator.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to replace the radiator on the Volkswagen Golf 5?
How to replace the radiator on the Volkswagen Golf 5?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To replace the radiator on the Volkswagen Golf 5, open the bonnet to access the components located within the engine compartment: the radiator is loc…
Removal and Replacement of the Cabin Heater Radiator in a Volkswagen Golf
Removal and Replacement of the Cabin Heater Radiator in a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below, we will discover how to remove and replace the cabin heater radiator in a Volkswagen Golf. First, open the bonnet and start disconnecting the …
How to Replace the Heater Radiator in a Volkswagen Golf 7?
How to Replace the Heater Radiator in a Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The procedure for replacing the cabin heater radiator in the Volkswagen Golf requires completely removing the dashboard to access the components insi…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos