Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

In this video, you will see how to remove the front bumper on a Volkswagen Golf 7, a very simple operation. Using a Torx T25 key, start by unscrewing the two upper screws of the grille and remove it, disengaging it from the bodywork.

Next, still using the T25 key, unscrew the 7 lower screws and the screws inside the wheel arches, 4 on each side. At this point, proceed to disengage the bumper from the frame, starting from one side and being careful not to damage the connections for the parking sensors and the washer jets, both of which need to be disconnected.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of a Volkswagen Golf Mk5
How to Remove the Front Bumper of a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) How to remove the front bumper of a Volkswagen Golf Mk5? Let’s see the disassembly. Lift the engine bonnet and secure it; using a socket wrench (batt…
How to remove the front bumper on Volkswagen Golf MK7
How to remove the front bumper on Volkswagen Golf MK7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In today's video, you will learn how to remove the front bumper on a seventh-generation Volkswagen Golf, following the instructions below. First, ope…
How to Replace the Front Headlamp of the Volkswagen Golf 7?
How to Replace the Front Headlamp of the Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To replace the front headlamp of the Volkswagen Golf 7, open the bonnet to access the screws securing the front bumper from the top. Next, remove the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos