Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb of the Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Light bulb

See other generations:
Video tutorial

To replace the front headlight bulb of the Volkswagen Polo, open the bonnet to access the engine compartment and remove the circular cap located inside the headlight. Once the cap has been removed, disconnect the connector and extract the bulb from its housing.

After the old bulb has been removed, connect a new one to the connector and insert it back into its housing. After installation, close the rear part of the headlight with the circular cap that was removed earlier.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on the Volkswagen Polo 5
How to Replace the Front Headlight Bulb on the Volkswagen Polo 5
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today, we will replace the front headlight bulb on the Volkswagen Polo model 5. To carry out the replacement, we first need to remove the headlight. …
How to replace the front light bulb on a Volkswagen Polo?
How to replace the front light bulb on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the front light bulb on a Volkswagen Polo, open the bonnet and then loosen the screws securing the headlamp from the top. Once it is freed…
How to Replace the Front Headlamp Bulb on a Volkswagen Polo
How to Replace the Front Headlamp Bulb on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) The procedure for replacing the front headlamp bulb on a Volkswagen Polo involves opening the bonnet to access the components located within the engi…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos