|
Do it yourself
| |||
| ||||
How to Replace the Spark Plugs in a Volkswagen Golf
Model: Volkswagen Golf
MK 2, Golf 2
- Years 1983-1992
In this video tutorial, you can see how to replace the spark plugs on a Volkswagen Golf. The first step is to lift the bonnet and secure it with the appropriate prop. Remove the engine cover using both hands. Take off the battery cover; using a 10 mm spanner, unscrew the battery fastening elements and remove them. Using an N.H6 HEX socket, unscrew the fastening element of the secondary air pump support bracket. Use a 10 mm socket to unscrew the fastening element that connects the air pump to the support bracket. Disconnect the hoses and the connector of the air pump and remove the air pump. Using a flathead screwdriver, disconnect the clips of the starter cable. With an N.H6 HEX socket, unscrew the fastening elements of the intake manifold. Cover the manifold to prevent dirt from falling inside. Remember the sequence of the spark plug holes. Using a 16 mm socket, unscrew the old spark plugs and replace them with new ones.
Updated on 29 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
To replace the spark plugs on the Volkswagen Golf 5, you need to remove the dipstick to work more comfortably. You will need to remove all the screws…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
In today's video, learn how to replace the spark plugs in the seventh generation Volkswagen Golf petrol. The schedule for replacing these components …
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
To replace the glow plugs in the engine of a Volkswagen Golf 7 1.6 TDI, first open the bonnet by pulling the release lever inside the cabin and then …
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.119
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |