Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the Camshaft Oil Seal

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Engine

Before fitting the new camshaft oil seal, ensure there are no residues or dents in the aluminium seating that could compromise the seal's integrity. Lubricate the oil seal with clean oil and insert it into its seating until fully seated, using the appropriate tool and taking care not to deform it. Next, fit the toothed pulley, tightening the fastening pins with a torque wrench, align the timing marks, and install the timing belt (consider replacing the tensioner and idler if necessary).

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Replacing the camshaft is a task reserved for specialists as it requires experience and appropriate dedicated equipment. After removing the valve cov…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Thoroughly lubricate the valve guide tappets and the tappets themselves with clean oil before inserting them into their respective seats; similarly, …
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) First, generously lubricate the new tappet cups before inserting them into their respective valve control seats, apply the new bearings to the camsha…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos