|
Do it yourself
| |||
| ||||
Replacement of the Timing Belt
Model: Volkswagen Transporter
MK 4, T4
- Years:
1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Video tutorial
Replacing the timing belt is a maintenance task that requires good mechanical knowledge, as an error in its installation could severely compromise the engine. Start by removing the intake hose, disconnecting the air conditioning sensor connectors, and then removing the cover of the auxiliary belt; remove the right front wheel and slide off the auxiliary belt; remove the caps from the pulleys and take off the water pump pulley, the idler pulleys, and the crankshaft pulley to remove the timing belt cover, first aligning the timing marks; remove the air filter housing, the right front headlamp, the power steering oil reservoir, and the windscreen washer fluid reservoir to improve working space. Drain the coolant, loosen the tensioner, and remove the old timing belt; then replace the water pump, the tensioner, and install the new timing belt. During reassembly, consider whether to replace the auxiliary belt and the related idler pulleys as well.
Updated on 13 February 2026 by ScegliAuto
Related tutorials
Volkswagen Transporter
(1990-2003 /
MK 4, T4)
Below, we will discover the instructions on how to remove and replace the timing belt on the Volkswagen Transporter 1.9 TD. First, open the bonnet an…
Volkswagen Transporter
(2003-2014 /
T5, MK 5)
Here are useful instructions for removing and replacing the timing belt on the Volkswagen Transporter 2.0 TDI. The manufacturer recommends replacing …
Volkswagen Transporter
(1990-2003 /
MK 4, T4)
This guide shows you the main steps to remove and replace the timing belt on the Volkswagen Transporter with a diesel engine. First, lift the vehicle…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.105
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |