Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rocker Cover Gasket

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine

See other generations:
Video tutorial

Before applying the new gasket, it is essential to thoroughly clean the gasket seats, both on the cylinder head side and the cover side: it is necessary to remove any dirt and deposits that could compromise the adhesion and therefore the seal of the gasket, leading to oil leaks; once the cleaning phase is complete, apply gasket sealant only at the corners, position the new gasket by passing the dowels through the appropriate holes, and fit the cover by tightening the corresponding nuts with a torque wrench.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rocker Cover on the Volkswagen Golf - Polo - Jetta 1.9 TDI
How to Replace the Rocker Cover on the Volkswagen Golf - Polo - Jetta 1.9 TDI
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you will see how to remove and replace the rocker cover and gasket on the Volkswagen Golf Mk5 1.6 TDI, as well as on the Polo…
Replacement of Tappet Cups
Replacement of Tappet Cups
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) First, generously lubricate the new tappet cups before inserting them into their respective valve control seats, apply the new bearings to the camsha…
Replacing the Engine Air Filter
Replacing the Engine Air Filter
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The engine air filter housing (air box) is located centrally, just behind the rocker cover: once you have unscrewed the fixing screws of the cover, l…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos