Do it yourself
Frequently asked questions about cars and motorcycles

How to Install an Automatic Light Switch on a Volkswagen Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Checks and maintenance

If you often accidentally leave your headlights on during the day, the best solution is to install this automatic light switch on your Volkswagen Up. Start by removing the dashboard side panel on the driver's side, then take out the existing light switch using a small plastic spatula. You will need to install a light sensor that will automatically turn on the lights. Position it at the top, in the unshaded area of the windscreen, then run the wiring through the pillars and connect it to your switch. All of this runs through the side panel you removed. This is a right-hand drive vehicle, but you should consider everything flipped to the left. For this purpose, the YouTuber's instructions for sourcing the part referred to eBay UK, which does not ship to Italy. However, since this part is related to a Passat B5, you can easily find it here: ita. Grandado. Com with code UHJvZHVjdFZ at a price of £45.69 including delivery.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Up (2011-2024 / MK 1) In this video, learn how to disable the automatic locking of the doors on a Volkswagen e-Up, as well as on the traditional second-generation Up! (fac…
Volkswagen Up (2011-2024 / MK 1) You can clear the Service light displayed on the instrument cluster of the Volkswagen Up by moving inside the cabin, so that you can press and hold t…
Volkswagen Up (2011-2024 / MK 1) To reset the Inspection light on a Volkswagen Up, press the button located in the centre of the instrument cluster, just below the speedometer. This …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos