Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Contact Rotor

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Fuel injectors

See other generations:
Video tutorial

If the engine fails to start or the starter motor does not activate when turning the key to the start position, it is likely that there is wear on the contacts in the rotor located just behind the ignition switch. To replace it, first disconnect the battery, then proceed to remove the airbag, steering wheel, light switch, and the protective covers located directly behind the steering wheel; at this point, you will need a special puller to remove the bearing located just in front of the ignition switch, then pull out the ignition switch and proceed with the rotor replacement.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to Repair the Seatbelt Warning Fault on a Volkswagen Golf V
How to Repair the Seatbelt Warning Fault on a Volkswagen Golf V
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) On Volkswagen Golf Vs, an intermittent fault with the seatbelt warning is common: the chime or light activates and deactivates randomly, even when th…
How to repair or replace the turn signal switch of the Volkswagen Golf
How to repair or replace the turn signal switch of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide we will see how to disassemble and replace (or possibly repair) the turn signal switch of the Volkswagen Golf. First of all, we get int…
Replacing the Temperature Sensor
Replacing the Temperature Sensor
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The temperature sensor is used to measure the engine temperature. It is an electronic component whose resistance decreases as the temperature increas…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos