Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injectors in a Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuel injectors

See other generations:
Video tutorial

In this tutorial, you will see how to replace the injectors in a Volkswagen Golf. First, wait for the engine to be completely cold, then open the bonnet and remove the air filter box by unscrewing each bolt. Next, remove the high-pressure fuel line by unscrewing both the nut securing it to the pump and the two front bolts, then disconnect the sensor and all the injector connectors.

Once this is done, remove the metal cage of the first injector and extract it using a screwdriver or any equivalent tool. To install the replacement, follow the reverse procedure.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Remove the Injectors from a Golf 6
How to Remove the Injectors from a Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) How to remove the diesel injectors from a Volkswagen Golf 6? Lift the front bonnet of the car to access the engine bay, locate the engine soundproofi…
How to Remove the Pump Injectors from the VW Golf
How to Remove the Pump Injectors from the VW Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The failure of the pump injectors and their wiring that equip VW and Audi engines is well recognised, and the peculiarity lies in their location: the…
Where are the Fuses in the Volkswagen Golf?
Where are the Fuses in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The specific fuse boxes installed in the Volkswagen Golf serve to contain the fuses that manage the operation of the devices present in the vehicle: …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos