Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Light on a Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

When the engine light appears on the instrument cluster of a Volkswagen Polo, it indicates that there are generic issues with the car's injection system. You can identify the cause of the problem by performing a diagnosis using an OBD scanner.

This scanner should be connected to the OBD port located at the bottom left of the steering column. You can then perform the diagnosis to identify the problem and reset the error that causes the light to illuminate.

This will allow you to disconnect the scanner and switch on the cluster to verify that the reset has been successful.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Before you begin, sit in the driver's seat of your Volkswagen Polo. Start by pressing and holding the button located beneath the speedometer. At the …
How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before starting, sit in the driver's seat of your Volkswagen Polo. Press and hold the button located below the right side of the multifunction displa…
How to Reset the Tyre Pressure Light on a Volkswagen Polo?
How to Reset the Tyre Pressure Light on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Good morning, today’s goal is to reset the tyre light on our Volkswagen Polo. Start by sitting in the driver’s seat of the car. Then, start the car b…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2017-2025 - The EPC light of the Volkswagen Polo 1.0 TSI Sport BMT is on, what can I do? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos