Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Up
    4. : How to change the outer cap of the Volkswagen Up's side mirror.

Volkswagen Up - Video tutorial

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Outside rearview mirror
Operation: How to change the outer cap of the Volkswagen Up's side mirror.

To change the cap of the external rearview mirror of a Volkswagen Up (but the procedure is identical for the Seat MII and Skoda Citigo), it is necessary to remove it from its housing, which is very simple because it is fixed from the inside with only one screw. Once we have the mirror in our hands, we move the glass all the way to one side so that we can remove it. Then, we use a plastic spatula to remove the frame. Now comes the most difficult part, as we need to separate the mechanism from the cap. With a little patience, we use the plastic spatulas to leverage until we can release the hooks from the clips. Now we can reassemble everything on the new cap.


Posted on 10 September 2023 by ScegliAuto



Mirror replacement on Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Replacing the exterior mirror on Volkswagen Up is a really simple operation. I recommend that you use a plastic wedge for the first operation you are
How to change the air filter on Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Let's see how to change the engine air filter on a Volksawgen Up. We open the car door, pull up the engine compartment opening lever located at the b
How do you set the clock on the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) The clock on the Volkswagen Up is adjusted by turning on the instrument panel and rotating the key in the ignition: once the panel is turned on, you

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos