Do it yourself
Frequently asked questions about cars and motorcycles

Removal of Rear Window Regulator Motor for Repair

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Power window motor

Start by removing the rear seat base, then using a ratchet spanner, unscrew the screws of the backrest that needs to be removed. Remove the screw on the side and lift the cover of the mechanism by disengaging the retaining lever, then remove the panel and the pillar cover using a plastic tool. Disconnect the sliding cable and remove the speaker support to access the underlying mechanism. Unscrew the retaining screw of the glass and then remove it from its seat, and using a ratchet spanner, unscrew the three bolts of the window regulator motor to extract it from above. Once the motor is repaired, proceed with the new installation in reverse order of the assembly operations. Check the correctness of the installation and make any necessary adjustments.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen New Beetle (1999-2012 / MK 2, 9C) In this guide, we will explore the instructions that will allow us to repair the window regulator motor on the Volkswagen New Beetle. First, get into…
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Below are the instructions to remove and replace the window regulator motor on a Volkswagen New Beetle in simple steps. First, open the front door of…
Volkswagen New Beetle (1999-2012 / MK 2, 9C) These brief and simple steps will allow you to remove and replace the window regulator mechanism of the Volkswagen New Beetle. First, open the front …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos