Do it yourself
Frequently asked questions about cars and motorcycles

How the DPF Regeneration Process Works on the Volkswagen Polo 1.6 TDI

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Diesel particulate filter

See other generations:
Video tutorial

This video provides interesting details about the regeneration of the particulate filter on the Volkswagen Polo 1.6 TDI: the first thing to know is that this occurs at very variable mileages. This depends on the type of roads you have driven, as if you have done a lot of motorway driving or fast roads, it can take up to 1,000 miles before regeneration is needed; however, if you have driven a lot in the city with stop-and-go traffic, it may only take less than 200 miles for regeneration to be necessary.

This vehicle does not have a light to indicate that regeneration is in progress, but the symptoms are evident: the revs increase, it performs less at speed, and there is intense heat emanating from the engine bay. Regenerations should not be interrupted; if it happens for any particular reason, upon restarting, the process resumes from where you left off. Regarding the time it takes to regenerate, if you take the vehicle on a good stretch of motorway, it regenerates much quicker compared to leaving it idling.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Below are the instructions that will allow you to remove and replace the fuel filter on the Volkswagen Polo 1.6 TDI. First, open the bonnet and locat…
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In the video tutorial available to us, there is a very well-made step-by-step explanation of how to replace the diesel filter of the Volkswagen Polo …
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video tutorial, you will learn how to remove and replace the diesel filter on a Volkswagen Polo 1.6 TDI; the procedure is similar for other v…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos