Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on a Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Parking brake

See other generations:
Video tutorial

In this tutorial, see how to adjust the handbrake on a Volkswagen Polo, a very simple and quick operation. First, park the vehicle on a perfectly flat surface, then position yourself on the rear seat and remove the plastic cover of the centre console.

Next, locate the adjustment bolt and, using a 10 mm spanner, tighten or loosen it as needed until you reach the desired tension level. Finally, reassemble everything and test the correct operation of the handbrake on a slope.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Volkswagen Polo?
How to Adjust the Handbrake on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To adjust the handbrake on the Volkswagen Polo, use a tool to pry off the cover of the storage compartment located in front of the handbrake. Once th…
How do you adjust the handbrake of the Volkswagen Polo?
How do you adjust the handbrake of the Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) On the Volkswagen Polo, the procedure for adjusting the handbrake is done by lifting the part of the central tunnel that is located immediately behin…
How to adjust the handbrake on the Volkswagen Polo?
How to adjust the handbrake on the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To adjust the handbrake on the Volkswagen Polo, use a tool to pry off the plastic cover of the centre tunnel. Once this cover is removed, locate the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos