Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb of the Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

See other generations:
Video tutorial

This video shows the procedure to replace the front headlight bulbs of the Volkswagen Polo 4. The bulbs are H7. To replace them, first open the bonnet and secure it with the appropriate catch. Once the bonnet is open, remove the bulb cover located behind the headlight.

After removing the cover, grasp the bulb connector and pull to extract it; at this point, remove the bulb from the connector by pulling it out, insert the new bulb into the connector, reinsert it into the headlight, and reposition the cover. The headlight bulb has now been successfully replaced.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on the Volkswagen Polo 5
How to Replace the Front Headlight Bulb on the Volkswagen Polo 5
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today, we will replace the front headlight bulb on the Volkswagen Polo model 5. To carry out the replacement, we first need to remove the headlight. …
How to Replace the Front Headlamp Bulb on the Volkswagen Polo 5
How to Replace the Front Headlamp Bulb on the Volkswagen Polo 5
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this guide, you will learn how to correctly replace the front headlamp bulb on your Volkswagen Polo Mk5. First, lift the bonnet of the car and sec…
How to Replace the Rear Light Bulb on a Volkswagen Polo
How to Replace the Rear Light Bulb on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the rear light bulb on a Volkswagen Polo, open the boot and lift the side carpet in line with the light. Underneath, you will find a pin t…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos