|
Do it yourself
| |||
| ||||
How to replace the engine oil and filter on a Volkswagen Polo Mk5?
Model: Volkswagen Polo
6R, MK V, Polo 5, Polo V, MK 5
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
In this video, you will see how to change the engine oil and filter on a Volkswagen Polo Mk5: open the bonnet and unscrew the oil filler cap. Raise the front of the car and secure it on axle stands for safety, then thoroughly clean the area around the oil drain hole with a wire brush and a spray like WD-40. Place a suitable container under the oil sump to collect the used oil, which you will dispose of properly at an authorised centre. Meanwhile, from the top, clean the oil filter housing cap and prepare a container for the old oil filter you will remove. Clean the seating and install the new filter after lubricating the rubber seal of the new filter with a small amount of new oil. Go back underneath, clean the oil drain area, and screw in the new plug with the new seal. Now you can lower the car and refill the tank with new oil. The vehicle in the video is a 1.6 with 66 kW, requiring 4 litres of SAE 5W40 oil: pour in about 90%, then check the level, ensuring not to exceed the maximum level. Replace the cap, and the operation is complete.
Updated on 3 October 2026 by ScegliAuto
Related tutorials
Volkswagen Polo
(2009-2017 /
6R, MK V, Polo 5, Polo V, MK 5)
In this video tutorial, you will see how to replace the engine oil and oil filter on a Volkswagen Polo 1.2 TSI. First, open the bonnet and remove the…
Volkswagen Polo
(2009-2017 /
6R, MK V, Polo 5, Polo V, MK 5)
Below are the steps necessary to perform the routine maintenance service, replacing the engine oil and oil filter of the Volkswagen Polo 1.2 TSI. Fir…
Volkswagen Polo
(2001-2009 /
MK IV, Polo 4, 9N, MK 4, Polo IV)
Today we will explain how to replace the engine oil and oil filter of the Volkswagen Polo 4. To perform the oil replacement, it is necessary to open …
Other guides you may be interested in
|
How to Open the Bonnet on the Mitsubishi L200?
In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.064
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |