Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the A-Pillar of a Volkswagen Passat B6

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Body

See other generations:
Video tutorial

How to remove the A-pillar of a Volkswagen Passat, perhaps to install the cables for a dash cam? This video explains it. Before starting this job, it is advisable to disconnect the negative terminal of the battery to prevent the airbag in the pillar from deploying.

This is a rare occurrence, but it is still possible.

Remove the clip, and using a flat screwdriver, take out the Torx screw located inside. Once that is removed, you will only find plastic clips, which will come off easily with a bit of force, allowing you to remove the pillar without any difficulty.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) Before starting, open the bonnet of your Volkswagen Passat. Begin by unfastening and removing the two clips that secure the strut to the bonnet and t…
Volkswagen Passat (2005-2010 / B6, 3C) Discover the procedure for removing the cabin heating radiator on the Volkswagen Passat B6, as well as the Golf 5. First, open the bonnet and disconn…
Volkswagen Passat (2010-2014 / B7) Want to remove the lock from a Volkswagen Passat? In this video, we will briefly see how to disassemble it and remove it from the door housing. To re…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Guide to replacing the 12V battery on the Toyota Yaris Cross

Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover.

Watch the video!


by ScegliAuto

More videos