|
Do it yourself
| |||
| ||||
How to Remove the Door Panel on a VW Passat
Model: Volkswagen Passat
B7
- Years:
2010, 2011, 2012, 2013, 2014
Video tutorial
In this guide, learn how to remove the rear door panel on a Passat. Start by opening the door you wish to disassemble. Then, using a plastic trim tool, remove the handle cover. Unscrew the fastening screws with an Allen key or Torx screwdriver, and then use the trim tool to detach the door panel from the metal door. Once the panel is free from the plastic clips, pull it away from the door (disconnect the speaker and window switch connectors). For reassembly, follow these steps in reverse. - Plastic trim tool - Allen key - Screwdriver.
Updated on 26 February 2026 by ScegliAuto
Related tutorials
Volkswagen Passat
(2005-2010 /
B6, 3C)
Before you can start, open the door of your Volkswagen Passat. Begin by unclipping and removing the insert of the door handle panel, using a thin but…
Volkswagen Passat
(1996-2005 /
3BG, B5)
Is the door panel of a VW Passat damaged and needs replacing? Here’s how to remove it from the right door. Remove the switch panel in the internal ha…
Volkswagen Passat
(2010-2014 /
B7)
Removing the door panel of the Passat? Here’s how to do it. Detach the plastic cover under the window, unscrew the screws located in its space. Unscr…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.108
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |